Toshiba IK-TF5C instruction manual Safety Precautions

Page 2

SAFETY PRECAUTIONS

Safety icons

This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and the icons highlight these instructions as follows:

Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.

Indicates a potentially hazardous situation which, if not avoided, may result in property damage.

Stop operation immediately when any abnormality or defect occurs.

Use during an abnormal condition; such as emitting smoke, burning odors, dam- age from dropping invasion of foreign objects, etc. may cause fire and/or electric shock. Immediately stop the power source and contact your dealer.

Avoid installing in a shower room or a bathroom.

This may cause fire and/or electric shock.

Do not operate in places with possibility of becoming wet.

This may cause fire and/or electric shock.

Do not repair, disassemble and/or modify by yourself.

This may cause fire and/or electric shock. Be always sure to contact your dealer for internal repair, check and cleaning of the product.

Use the specified power supply.

Otherwise, a fire or an electric shock may occur.

Don’t place things or materials on the unit.

Ingress of foreign materials such as metallic things and liquid into the product may cause a fire or an electric shock.

Do not put the product in an unstable, slanting and/or vibrated place.

Drop and/or fall of the product may cause serious injury.

Do not touch the product and/or any connection cables during a thunder- storm.

This might cause electric shock.

2

Image 2

Contents For Customer Use Following information is only for EU-member statesSafety Precautions Avoid setting in humid, smoky, vaporized or dusty places DisclaimerTable of Contents Components Items Controlled by Using on Screen Display Available selectionsNames and Functions Standard Connection Connector Pin AssignmentsConnection Automatic White Balance Manual White Balance Outline OperationWhite Balance Result displayed MeaningShading Correction Shutter speed mode is E.TRG modeGain OFFMode Setting by on Screen Display Using the MenusMenus Changing each setting in Manu modePartial scanning setting Shutter Electronic shutterChanging the shutter speed setting Changing each setting in SS synchro. scan modeMode = SS Changing the polarity of inputting trigger pulse setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing 1P SNR exposure time settingChanging 1P SR exposure time setting Changing each setting in 1P SR modeMode = E.TRG E.TRG = 1P SR Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SNRChanging each setting in PW SR mode Mode = E.TRG E.TRG = PW SRChanging each setting in Gain Changing each setting in RR modeMode = E.TRG E.TRG = RR Changing the gain in Manu modeWHT BAL White balance Changing master pedestal Changing the shading correction modeChanging the manual shading correction setting Changing R pedestalOption Adjusting horizontal phaseSync Data UP, Down Menu UP, DownShutter mode HD input VD input Setting to factory setting statusExternal sync signal polarity External SyncSetting by 1H Setting by the frameUsing the unit with external sync signal Horizontal phase adjustmentEXT Trig External trigger 1P SNR 1 Pulse Trigger Sync Non Reset1 Pulse Trigger SYNC-NON Reset Picture Output Timing Fval Lval DvalInternal VD*3 1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output TimingPW SNR Pulse width trigger SYNC-NON Reset About 7 ∝s PW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output TimingLong Term Exposure RR Reset restartInput Timing Chart Example Partial Scanning OFF All pixels scanning When Partial Scanning Mode is onPartial Read Partial Scanning onInput Output Signal Specificatoins Vertical Output Waveform Timing Chart CCD Output Waveform Timing ChartHorizontal Output Waveform Timing Chart Specifications RGB, 3CCDSymptom Items to be checked External Appearance DiagramBefore Making a Service Call Imaging Systems Division Limited One 1 Year Warranty of Labor and PartsStep-by-step Procedures How to Obtain Warranty Service