Siemens SED2 manual Stopped Running Fault Inhibit

Page 18

SED2 AOP Operating Instructions

The AOP display the current status of the SED2 and motor. The following table explains information on this display.

STOPPED

F=0.00Hz

Fn

r0000

P

I=0.0A

RPM=0

 

M=0%

V=0.0V

 

 

 

 

Table 1. Status Information of an AOP Display with an Operating SED2.

Data

Description

 

 

STOPPED

RUNNING

FAULT

WARNING

INHIBIT

r0000

F= 0.00 Hz

S= 0.00 Hz

I= 0.0 A

RPM= 0

M= 0%

V= 0.0 V

Vdc= 0.0V

and

and

and

Indicates the motor connected to the SED2 is not running (pulses disabled).

Indicates the motor connected to the SED2 is running (pulses enabled).

Indicates a fault condition has occurred. The SED2 is not running. A fault, described by the AOP under the Diagnostics menu, is preventing operation.

The SED2 has detected a problem in normal operation and is informing you of the drive condition.

A previously occurring fault or OFF condition is preventing SED2 operation. Sending an OFF1 command from the currently active command source clears this condition.

Indicates a read-only parameter. Drive Display r0000 is the normal operating display.

Indicates the frequency at which the SED2 VFD/motor is running.

Indicates the speed (frequency) when the motor last stopped.

Indicates the output current.

Indicates the speed of the motor.

Indicates the current torque of the motor.

Indicates the output voltage.

Indicates the dc link voltage.

Simultaneously press these keys, at any time, to display the main menu.

Simultaneously press these keys to display the help screens.

Press P to select the parameter access screen.

Navigation keys to scroll through information on the display.

Indicates the direction of the running motor.

10

Siemens Building Technologies

Page 17 Page 19
Image 18
Page 17 Page 19
Contents SED2 Advanced Operator Panel AOP Page SED2 AOP Operating Instructions Rev , SeptemberPage Service Statement European EMC Directive European Low Voltage DirectiveEuropean Machinery Directive Underwriters LaboratoriesTable of Contents AOP Setup & Configuration AOP Faults & WarningsHow to Use this Manual Manual OrganizationManual Notations Where To Send CommentsNotation Symbol Meaning Reference DocumentsMain Menu Local and Master Modes AOP OverviewAOP Menu Structure Local 1 DriveKey Functions Key Function Functional DescriptionAOP Overview Power-on and Initialization AOP Start-Up & InitializationImportant Notes Memory Limitation Language SelectionStart Help To Delete a LanguageQuick Commissioning Menu ItemDescription AOP Start-Up & Initialization Stopped Running Fault Inhibit Single Drive Control Using the AOP Network Setup RS-485 with Panel Mounting KitAOP Applications Network Setup PC Mode Parameter Access Levels Editing ParametersEditing Conventional Parameters TIP How to quickly change parameter values? Editing Indexed ParametersAOP Stored Parameter Sets Editing AOP-Stored Parameter SetsEditing Internal AOP Parameter Set Parameter Upload Upread Upload/Download LimitationsParameter Wait Request Parameter DownloadSED2 AOP Operating Instructions Selecting an Operating Mode Operating ModeAOP Operating Modes Operating in Local Mode Operating in Master Mode Individual Control of SED2 VFDIcon Description Displaying Drive Status Operating in Master Mode Broadcast OperationCommunications Failure Verifying Drive TypeTimer Function Setting the AOP TimerKey Timer Function AOP Setup & Configuration Setup MenuBacklighting Screen Contrast Large Number DisplayCursor Type Welcome Text User Defined TextParameter Set Names Set Time/DateAOP Reset $51,1AOP Faults & Warnings Fault Indication/Fault ScreenSED2 VFD Fault/Warning Record P0947 Multiple FaultsSimultaneous Faults and Warnings Multiple WarningsSiemens Building Technologies, Inc Siemens Building Technologies, Inc Siemens Building Technologies AG
Top Page Image Contents