SED2 AOP Operating Instructions
2.Use 
and 
to select the desired cursor type (blinking underline or
Press 
to confirm the selection and the AOP returns to the setup menu.
NOTE: Simultaneously press 
and 
at any time to display relevant help screens.
Start Help
NOTE: By default, the Start Help function is set ON. To change this setting, select Start Help from the setup menu.
1.Use 
and 
to highlight the Start Help option on the setup menu. Press 
to confirm the selection.
The AOP displays a start help screen.
2.Use 
and 
to select either an OFF or ON start help function.
Press 
to confirm the selection and the AOP returns to the setup menu.
NOTE: Simultaneously press 
and 
at any time to display relevant help screens.
Welcome Text
Use the following procedure to edit the welcome text that displays on the AOP at
1.Use 
and 
to highlight Welcome Text option on the setup menu. Press 
to confirm the selection.
The AOP displays a welcome text screen.
2. Use | and | to select an ON or OFF welcome text status. |
Press | to cancel this selection and to return to the setup menu. | |
Press | to confirm the selection and the AOP displays a text screen with the first character | |
highlighted. The text string can contain a maximum of 20 characters.
3.Use 
and 
to scroll through the characters until the desired character is shown. Press 
to accept the character and to advance to the next character.
Repeat this step until the desired text is entered.
4.Press and hold 
to except the text string and to return to the setup menu.
Press and hold 
to cancel the text entry, restore the original text string, and to return to the setup menu.
NOTE: Simultaneously press 
and 
at any time to display relevant help screens.
User Defined Text
With the following procedure, you can enter a
1.Use 
and 
to highlight User Defined Text option on the setup menu. Press 
to confirm the selection.
The AOP displays a user text screen.
26 | Siemens Building Technologies |