Toshiba e-STUDIO203 manual Features of e-STUDIO163/203, Functions extended by various options

Page 15

Features of e-STUDIO163/203

The e-STUDIO163/203 is a space-saving, black-and-white copier. The copying speed of the e-STUDIO163 is 16 copies per minute*1 and that of the e-STUDIO203 is 20 copies per minute*1. Both of them can be a printer when they are connected to your PC with a USB cable.*2

Lightweight and space-saving equipment with more emphasis on basic functions

yThe receiving tray is relocated to the equipment’s inner side, occupying as little space as possible.

yIts weight has been trimmed to approx. 33.7 kg.*3

yOperability of the control panel has been upgraded with larger buttons.

yA wide range of paper sizes from A3 to A5-R are acceptable.

yCopy images can be zoomed out or in between 25% and 200%.

yThe automatic copy density mode is adopted to detect the density of the original and auto- matically adjust it to the most suitable one for the copy image.

yThe bypass tray equipped as a standard unit makes copying on various media types such as overhead transparencies possible.

yScanning data with a TWAIN driver is enabled as a standard function.

Functions extended by various options

yThe Automatic Document Feeder (ADF) dramatically saves time when you need to copy massive amounts of originals.

yThe Paper Feed Unit (PFU) adds one more drawer.

yElectronic sorting*4 is realized with the Expansion Memory.

Ecological energy-saving design

yA toner recycling system which produces no used toner is adopted.

yIts warm-up time is shortened to approx. 25 seconds.

yThe low power mode, which reduces unnecessary electric power by having the fuser unit temperature lowered while the equipment is left inactive, is adopted.

yThe sleep mode, which maintains the smallest possible power consumption during the equipment’s inactive period after it has not been used within a specified period of time, is adopted.

*1 These speeds are realized in the non-sort mode, when A4 originals placed in a portrait direction are con- tinuously copied and the Automatic Document Feeder (optional) is not used.

*2 When this equipment is used as a printer, the co-packed software needs to be installed into your PC.

*3 This is the weight of the equipment itself (without any options).

*4 Electronic sorting is a function to have the copies exit and be sorted into the same page order as that of the originals in each set.

Features of e-STUDIO163/203 13

Image 15

Contents Operators Manual for Copying Functions EPA Energy Star MFD For Germany only For EU onlyPage Operator’s Manual for Copying Functions Lineup of Our ManualsBefore Reading This Manual Precautions in this manualTrademarks Description of original/paper directionBefore Reading This Manual Contents 100 Copying in Same Page Order as Originals Sort CopyingIndex 111Contents Toner remaining check function Toshiba Quality is Second to NoneRecommended toner cartridges Cartridge detecting functionSupplies / Parts TonerGeneral Features of e-STUDIO163/203 Functions extended by various optionsEcological energy-saving design When installing or moving General Precautions10 cm 80 cm Other pointsWhen using the equipment Position of Certification label, etc When handling supplies During maintenance or inspectionPoration Disclaimer NoticeDisclaimer Notice Preparation 1 Turning Power on Description of Each ComponentPreparation 2 Placing Copy Paper Automatic Document Feeder optional, MR-2017 Description of Each ComponentFront / Right side Platen CoverLeft side / Inner side Platen sheet USB terminal 4-pinReceiving tray Scanning area Original scaleConfiguration of options Control panel Copy qty. / zoom display selecting button/lamp Original mode button/lampsDensity adjustment buttons/lamps LED displayOriginal button/lamps Original setting lampDrawer button/lamps Copy button/lampsPreparation 1 Turning Power on Turning power onTurning power OFF Saving energy when not in use Energy saving mode To turn the equipment into the energy saving mode manuallyCancelling the energy saving mode Preparation 2 Placing Copy Paper Acceptable media typesFeeder Media type Paper size Maximum sheet Capacity *1 Media type Product name Recommended paperPaper types not acceptable Storing paperPress down the paper plate Placing paper in drawersWiden the gap with both hands Place paper in the drawer Adjust the side guides to the desired paper sizeRegister the paper size into the equipment Do not let your fingers be caught when closing the drawerRegistering standard size A3, A4, A4-R, A5-R, B4 Preparation 3 Registering Size of Paper PlacedCode No Registering other standard sizesPreparation 3 Registering Size of Paper Placed Press the Start button Using Bypass Tray Placing OriginalsMaking Copies Acceptable originals When the built-in memory has become full during scanningSetting position Type of origi Placing OriginalsPlacing originals on the original glass Placing booklet-type originals such as books or catalogues Maximum number Paper weight Using Automatic Document Feeder optionalPrecautions for Automatic Document Feeder optional When black streaks appear on the copied imagePlacing originals on Automatic Document Feeder optional When placing a large amount of originals with a long widthSelect the copy modes as required Making CopiesCheck if paper is placed in the drawer Place the originalPress the CLEAR/STOP button during scanning or copying When the number of sheets exiting has exceededWhen the paper has run out Stopping/Resuming copyingPress the Interrupt button Interrupting copying and making another copy Interrupt copyMedia type Paper size Maximum sheet Capacity *1 Using Bypass TrayPreparation Registering paper size placed on bypass tray ST-R Folio Comp Using Bypass Tray Press the Start button Bypass copying on standard size paper Placed on the bypass tray is lit Using Bypass Tray Using Bypass Tray Default Settings Paper Selection Zooming In/Out Copy ImageAutomatic paper selection APS Manual paper selection Contents Default setting at installation Default SettingsAutomatic paper selection APS Paper SelectionAutomatic paper selection APS Place the original on the Automatic Document FeederPlace paper in the drawer Place the original Manual paper selectionSelecting the drawer of the equipment Specifying reproduction ratio manually Zooming In/Out Copy ImageAutomatic magnification selection AMS Automatic magnification selection AMSIf the Function Clear lamp is blinking and copying stops Specifying both the sizes of the original and the copy paper Specifying reproduction ratio manually Press Zooming out orDesired reproduction ratio appears Zooming In/Out Copy Image Copying in Same Page Order as Originals Sort Copying Selecting Image Mode Dark Adjusting Density LevelTo adjust the density to the desired level To return it to the automatic copy density modeAdjusting Density Level Settings and Management Equipment All lamps on Sound on All lamps off Sound off Switching Operation Sound On/OffSwitch the display to check the rest of the total number Checking Total Number CopiedPress Button for more than two seconds Checking Total Number Copied When Message Lamp is Lit/Blinking Paper Jams TroubleshootingToner lamp When Message Lamp is Lit/BlinkingCover open lamp Paper empty lampRecommended toner cartridges Paper jam lamp Service call lampWhen paper jams occur frequently Paper JamsChecking position of paper jams Do not tear jammed paper When releasing jammed paperPaper jams within Automatic Document Feeder optional Raise the lever, and then open the upper coverPaper Jams Pull out the paper jammed on the bypass tray Paper jams on bypass trayPaper jam behind transfer unit Close the transfer unit and the side cover Open the transport guide while holding the knob a Paper jams within fuser unitRelease the jammed paper Paper jams within Paper Feed Unit optional Replacing Toner Cartridge Open the front coverHold down the green lever Pull out the toner cartridge Clean the charger Insert the toner cartridge along the railOpen the side cover With the transfer charger wire Equipment starts supplying toner Before Calling Service Technician General operationPhenomenon Usual cause Countermeasure Original/Copy paper-related items Toner-related itemsImage trouble Tion Charger is dirty Clean the charger Daily Inspection 100 Maintenance and InspectionOriginal glass Guides Platen sheet Daily InspectionOpen the front cover Clean the charger Cleaning chargerCleaning transfer charger Daily Inspection Daily Inspection Specifications and Options OPC STUDIO163/203 SpecificationsPaper size Feeder STUDIO163 STUDIO203 Continuous copying speedSpecifications of Options Automatic Document FeederPaper Feed Unit Packing List Packing List AMS APS Index106 DP-1640/2030 OME050129B0 Multifunctional Digital Systems