Toshiba e-STUDIO203 Before Reading This Manual, Precautions in this manual

Page 6

Before Reading This Manual

This operator’s manual describes the following:

yHow to use this equipment

yHow to inspect and carry out maintenance on this equipment

yHow to remedy mechanical and copying problems

Precautions in this manual

To ensure correct and safe use of this equipment, this operator’s manual describes safety pre- cautions according to the three levels shown below.

You should fully understand the meaning and importance of these items before reading this manual.

Indicates a potentially hazardous situation which, if not avoided, could result in death, serious injury, or serious damage, or fire in the equipment or sur- rounding assets.

Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury, partial damage of the equipment or surrounding assets, or loss of data.

Indicates a procedure you should follow to ensure the optimal performance of the equipment and problem-free copying.

Other than the above, this manual also describes information that may be useful for the opera- tion of this equipment with the following signage:

Describes handy information that is useful to know when operating the equip- ment.

Pages describing items related to what you are currently doing. See these pages as required.

4 Before Reading This Manual

Image 6

Contents Operators Manual for Copying Functions EPA Energy Star MFD For EU only For Germany onlyPage Lineup of Our Manuals Operator’s Manual for Copying FunctionsPrecautions in this manual Before Reading This ManualDescription of original/paper direction TrademarksBefore Reading This Manual Contents Copying in Same Page Order as Originals Sort Copying 100111 IndexContents Cartridge detecting function Toshiba Quality is Second to NoneRecommended toner cartridges Toner remaining check functionSupplies / Parts TonerGeneral Features of e-STUDIO163/203 Functions extended by various optionsEcological energy-saving design General Precautions When installing or movingOther points 10 cm 80 cmWhen using the equipment Position of Certification label, etc During maintenance or inspection When handling suppliesDisclaimer Notice PorationDisclaimer Notice Preparation 1 Turning Power on Description of Each ComponentPreparation 2 Placing Copy Paper Platen Cover Description of Each ComponentFront / Right side Automatic Document Feeder optional, MR-2017Left side / Inner side Original scale USB terminal 4-pinReceiving tray Scanning area Platen sheetConfiguration of options Control panel LED display Original mode button/lampsDensity adjustment buttons/lamps Copy qty. / zoom display selecting button/lampCopy button/lamps Original setting lampDrawer button/lamps Original button/lampsPreparation 1 Turning Power on Turning power onTurning power OFF Saving energy when not in use Energy saving mode To turn the equipment into the energy saving mode manuallyCancelling the energy saving mode Preparation 2 Placing Copy Paper Acceptable media typesFeeder Media type Paper size Maximum sheet Capacity *1 Storing paper Recommended paperPaper types not acceptable Media type Product namePlacing paper in drawers Press down the paper plateWiden the gap with both hands Adjust the side guides to the desired paper size Place paper in the drawerDo not let your fingers be caught when closing the drawer Register the paper size into the equipmentPreparation 3 Registering Size of Paper Placed Registering standard size A3, A4, A4-R, A5-R, B4Registering other standard sizes Code NoPreparation 3 Registering Size of Paper Placed Press the Start button Using Bypass Tray Placing OriginalsMaking Copies Placing Originals When the built-in memory has become full during scanningSetting position Type of origi Acceptable originalsPlacing originals on the original glass Placing booklet-type originals such as books or catalogues When black streaks appear on the copied image Using Automatic Document Feeder optionalPrecautions for Automatic Document Feeder optional Maximum number Paper weightWhen placing a large amount of originals with a long width Placing originals on Automatic Document Feeder optionalPlace the original Making CopiesCheck if paper is placed in the drawer Select the copy modes as requiredStopping/Resuming copying When the number of sheets exiting has exceededWhen the paper has run out Press the CLEAR/STOP button during scanning or copyingInterrupting copying and making another copy Interrupt copy Press the Interrupt buttonUsing Bypass Tray Media type Paper size Maximum sheet Capacity *1Preparation Registering paper size placed on bypass tray ST-R Folio Comp Using Bypass Tray Press the Start button Bypass copying on standard size paper Placed on the bypass tray is lit Using Bypass Tray Using Bypass Tray Default Settings Paper Selection Zooming In/Out Copy ImageAutomatic paper selection APS Manual paper selection Default Settings Contents Default setting at installationPlace the original on the Automatic Document Feeder Paper SelectionAutomatic paper selection APS Automatic paper selection APSManual paper selection Place paper in the drawer Place the originalSelecting the drawer of the equipment Automatic magnification selection AMS Zooming In/Out Copy ImageAutomatic magnification selection AMS Specifying reproduction ratio manuallyIf the Function Clear lamp is blinking and copying stops Specifying both the sizes of the original and the copy paper Specifying reproduction ratio manually Press Zooming out orDesired reproduction ratio appears Zooming In/Out Copy Image Copying in Same Page Order as Originals Sort Copying Selecting Image Mode To return it to the automatic copy density mode Adjusting Density LevelTo adjust the density to the desired level DarkAdjusting Density Level Settings and Management Equipment Switching Operation Sound On/Off All lamps on Sound on All lamps off Sound offSwitch the display to check the rest of the total number Checking Total Number CopiedPress Button for more than two seconds Checking Total Number Copied Troubleshooting When Message Lamp is Lit/Blinking Paper JamsPaper empty lamp When Message Lamp is Lit/BlinkingCover open lamp Toner lampRecommended toner cartridges Service call lamp Paper jam lampWhen paper jams occur frequently Paper JamsChecking position of paper jams Raise the lever, and then open the upper cover When releasing jammed paperPaper jams within Automatic Document Feeder optional Do not tear jammed paperPaper Jams Paper jams on bypass tray Pull out the paper jammed on the bypass trayPaper jam behind transfer unit Close the transfer unit and the side cover Paper jams within fuser unit Open the transport guide while holding the knob aRelease the jammed paper Paper jams within Paper Feed Unit optional Replacing Toner Cartridge Open the front coverHold down the green lever Pull out the toner cartridge Clean the charger Insert the toner cartridge along the railOpen the side cover With the transfer charger wire Equipment starts supplying toner Before Calling Service Technician General operationPhenomenon Usual cause Countermeasure Toner-related items Original/Copy paper-related itemsImage trouble Tion Charger is dirty Clean the charger Maintenance and Inspection Daily Inspection 100Daily Inspection Original glass Guides Platen sheetCleaning charger Open the front cover Clean the chargerCleaning transfer charger Daily Inspection Daily Inspection Specifications and Options STUDIO163/203 Specifications OPCContinuous copying speed Paper size Feeder STUDIO163 STUDIO203Specifications of Options Automatic Document FeederPaper Feed Unit Packing List Packing List Index AMS APS106 DP-1640/2030 OME050129B0 Multifunctional Digital Systems