12
Palm Rest
Removing the Palm Rest
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
1Follow the instructions in "Before You Begin" on page 9.
2Remove any installed ExpressCards from the ExpressCard slot.
3Remove any installed memory modules or Mini Cards (see "Memory" on page 19 and "Communication Cards" on page 31).
4Remove the hard drive (see "Hard Drive" on page 15).
5Remove the display assembly (see "Display Assembly" on page 37).
6Turn the computer upside down and remove the fourteen screws from the computer base.
Palm Rest
49