14
Wireless Sniffer Board
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
NOTICE: Handle components and cards by their edges, and avoid touching pins and contacts.
1Follow the instructions in "Before You Begin" on page 9.
2Remove any installed ExpressCards from the ExpressCard slot.
3Remove the palm rest (see "Palm Rest" on page 49).
4Disconnect the wireless sniffer board cable from the system board.
5Remove the screw from the sniffer board and remove it from the computer base.
1
1screw
Wireless Sniffer Board
55