Dell Model PP06XA service manual Processor Thermal-Cooling Assembly

NOTE: The original pad can be reused if the original processor and heat sink are reinstalled together. If either the processor or heat sink is replaced, use the thermal pad provided in the kit to ensure that thermal conductivity is achieved.

NOTE: This procedure assumes that you have already removed the processor thermal-cooling assembly and are ready to replace it.

1Peel the backing off the thermal cooling pad and adhere the pad to the portion of the thermal-cooling assembly that covers the processor.

2Place the assembly on the system board.

3Tighten the five captive screws on the thermal-cooling assembly.

Processor Thermal-Cooling Assembly

63