Replacing the Palm Rest
1Align the palm rest with the computer base and gently snap it into place.
2Connect the touch pad connector to the system board.
3Replace the nine screws on the top of the palm rest.
4Turn the computer upside down and replace the fourteen screws in the computer base.
5Replace the display assembly (see "Replacing the Display Assembly" on page 39).
6Replace the Mini Cards and memory modules.(see "Memory" on page 19 and "Communication Cards" on page 31).
7Replace the keyboard (see "Replacing the Keyboard" on page 28).
8Replace the hinge cover (see "Replacing the Hinge Cover" on page 26).
52