1
2
1 screws (2) | 2 | speakers (2) |
Removing the Audio Connector Board
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
NOTICE: To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface (such as the back panel) on the computer.
1Follow the instructions in "Before You Begin" on page 9.
2Remove the palm rest (see "Palm Rest" on page 49).
3Remove the screw securing the audio connector board.
4Remove the audio connector cable from the system board.
5Remove the audio connector board by lifting it up.
70
Speakers, Audio Connectors, and Consumer Infrared