CAUTION: Keep your hands clear of the metal edges on the computer.
5Lift the cover out from the curved hinge at the bottom of the computer.
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions on page 7.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
To access components on the system board or to add parts to the computer, you must rotate the power supply out of the way:
1Shut down the computer (see page 18).
2Turn off any attached devices and disconnect them from their electrical outlets.
NOTICE: To disconnect a network cable, first unplug the cable from your computer and then unplug it from the network wall jack.
3Disconnect the computer power cable from the wall outlet, and then press the power button to ground the system board.
4Remove the computer cover (see page 52).
Adding Parts
53