Adding a Memory Module
1Press out the securing clip at each end of the memory module connector.
memory module connectors
securing clips (2) notches (2)
memory module
connector
cutouts (2)
step 1
step 2
step 3
2Align the notches on the bottom of the module with the crossbars in the connector.
NOTICE: To avoid damage to the memory module, press the module straight down into the socket with equal force applied at each end of the module.
3Insert the module straight down into the connector, ensuring that it fits into the vertical guides at each end of the connector. Press firmly on the ends of the module until it snaps into place.
If you insert the module correctly, the securing clips snap into the cutouts at each end of the module.
4Close the computer cover (see page 83).
Adding Parts
77