11Connect your computer and devices to electrical outlets, and then turn them on.
12See the documentation that came with the drive for instructions on installing any software required for drive operation.
13Check the system setup for drive configuration changes (see "Entering System Setup" on page 174).
Installing a Second Hard Drive
CAUTION: Before you begin any of the procedures in this section, follow the safety instructions in the Product Information Guide.
CAUTION: To guard against electrical shock, always unplug your computer from the electrical outlet before removing the cover.
NOTICE: To avoid damage to the drive, do not set it on a hard surface. Instead, set the drive on a surface, such as a foam pad, that will sufficiently cushion it.
NOTE: For additional drives, extra screws are not shipped during initial purchase of the computer, but are shipped with the additional drives.
1Follow the procedures in "Before You Begin" on page 101.
2Remove the computer cover (see "Removing the Computer Cover" on page 103).
3Check the documentation for the drive to verify that it is configured for your computer.
4Slide the second hard drive into the second hard drive bay.
5Align the screw holes in the second hard drive with the screw holes in the second hard drive bay.
132