D-Link Comprehensive Guide to Setting Up Your G604T DSL Router

DSL-G604T DSL Router User’s Guide

Information you will need from your ADSL service provider:

	This is the Username used to log on to your ADSL service	Record info here
Username	provider’s network. It is commonly in the form −
	user@isp.com. Your ADSL service provider uses this to
	identify your account.
Password	This is the Password used, in conjunction with the Username
	above, to log on to your ADSL service provider’s network.
	This is used to verify the identity of your account.
	This is the method your ADSL service provider uses to send
Connection Protocol	and receive data between the Internet and your computer.
	Your Modem supports the following connection protocols:
	PPPoE, PPPoA, PPPoA with DHCP, Bridge, and CLIP
	(IPoA).
	ADSL uses various standardized modulation techniques to
	transmit data over the allotted signal frequencies. Some
	users may need to change the type of modulation used for
Modulation Type	their service. The default DSL modulation (MMODE) used for
	the Router automatically detects all types of ADSL
	modulation. However, if you are instructed to specify the
	modulation type used for the Router, you have three
	alternatives: G.LITE, G.DMT and T1.413
	This is the method your ADSL service provider will use to
Security Protocol	verify your Username and Password when you log on to their
	network. Your Modem supports the PAP and CHAP
	protocols.
	This is the Virtual Path Identifier (VPI). It is used in
VPI	conjunction with the Virtual Channel Identifier (VCI) below, to
	identify the data path between your ADSL service provider’s
	network and your computer.
	This is the Virtual Channel Identifier (VCI). It is used in
VCI	conjunction with the VPI above to identify the data path
	between your ADSL service provider’s network and your
	computer.
IP Address	For 802.1X and WPA security.
(RADIUS server)
Port	For 802.1X and WPA security.
Secret	For 802.1X and WPA security.

Information you will need about your DSL-G604T ADSL Router:

	This is the Username needed access the Modem’s	Record info here
Username	management interface. When you attempt to connect to the
	device through a web browser you will be prompted to enter
	this Username. The default Username for the Modem is
	admin. This may be changed by the user.
Password	This is the Password you will be prompted to enter when you
	access the Modem’s management interface. The default
	Password is admin. This may be changed by the user.
	This is the IP address you will enter into the Address field of
	your web browser to access the Modem’s configuration
LAN IP addresses for the	graphical user interface (GUI) using a web browser. The
	default IP address is 192.168.1.1 and it is referred to as the
DSL-G604T	“Management IP” address in this User’s Manual. This may be
	changed to suit any IP address scheme the user desires. This
	address will be the base IP address used for DHCP service
	on the LAN when DHCP is enabled.

iii