LAN Subnet Mask for the DSL-G604T
This is the subnet mask used by the
255.0.0.0.This can be changed later.
Information you will need about your LAN or computer:
| If your computer has an Ethernet NIC, you can connect the | Record info here |
Ethernet NIC |
| |
You can also use the Ethernet port on the |
| |
| connect to other Ethernet devices, such as a Wireless |
|
| Access Point. |
|
|
|
|
| Your |
|
| be a DHCP server. This means that it can assign an IP |
|
| address, subnet mask, and a default gateway address to |
|
DHCP Client status | computers on your LAN. The default range of IP addresses |
|
the |
| |
|
| |
| 192.168.1.254. Your computer (or computers) needs to be |
|
| configured to Obtain an IP address automatically (that is, |
|
| they need to be configured as DHCP clients.) |
|
|
|
|
It is recommended that your collect and record this information here, or in some other secure place, in case you have to
Once you have the above information, you are ready to setup and configure your
|
|
| The Modem may be reset to its factory default settings by performing a Restore settings |
| |
|
|
| operation within the management interface (see System Commands). If you cannot |
| |
|
|
|
| ||
|
|
| gain access to the management interface, you may opt to use the Reset button on the |
| |
Note |
|
| |||
| rear panel of the device (see 錯 誤 ! 找 不 到 參 照 來 源 。 | below). |
| ||
|
|
|
| ||
|
|
|
|
|
|
Packing List
Open the shipping carton and carefully remove all items. Make sure that you have the items listed here.
1.One
2.One
3.One
4.One
5.One AC power adapter suitable for your electric service
6.One Quick Installation Guide
iv