NETGEAR WNR834M manual Configuring E-Mail Alert and Web Access Log Notifications

Page 41

NETGEAR RangeMax™ NEXT Wireless Router WNR834M Reference Manual

Configuring E-Mail Alert and Web Access Log Notifications

In order to receive logs and alerts by E-mail, you must provide your E-mail information in the E- Mail menu, shown below:

Figure 4-6

•Turn e-mail notification on.

Check this box if you wish to receive e-mail logs and alerts from the router.

•Your outgoing mail server .

Enter the name of your ISP’s outgoing (SMTP) mail server (such as mail.myISP.com). You may be able to find this information in the configuration menu of your e-mail program. If you leave this box blank, log and alert messages will not be sent via e-mail.

•Send to this e-mail address.

Enter the e-mail address to which logs and alerts are sent. This e-mail address will also be used as the From address. If you leave this box blank, log and alert messages will not be sent via e- mail.

You can specify that logs are automatically sent to the specified e-mail address with these options:

•Send alert immediately.

Check this box if you would like immediate notification of attempted access to a blocked site.

•Send logs according to this schedule

Specifies how often to send the logs: Hourly, Daily, Weekly, or When Full.

Content Filtering

4-7

v1.3, May 2006

Image 41

Contents NETGEAR, Inc Statement of Conditions TrademarksEuropean Union Statement of Compliance Certificate of the Manufacturer/Importer Bestätigung des Herstellers/ImporteursWorld Wide Web Voluntary Control Council for Interference Vcci StatementCustomer Support V1.3, May Contents Chapter Content Filtering Appendix a Technical Specifications V1.3, May Typographical Conventions Chapter About This ManualAudience, Scope, Conventions, and Formats Manual Scope How to Use This ManualHow to Print this Manual Publication Revision History Revision HistoryV1.3, May Chapter Introduction Package ContentsStatus Light Front of the Wireless RouterBack of the Wireless Router RangeMax Next Wireless Router WNR834M Online Setup Manuals Installing the WNR834M routerHow to Access the Wireless Router Again Later V1.3, May Maintenance and Support Observing Performance, Placement, and Range Guidelines Chapter Wireless ConfigurationImplementing Appropriate Wireless Security V1.3, May If WPA-PSK or WPA2-PSK Authentication is Used Default Factory SettingsUnderstanding Wireless Settings WEP Basic Wireless Security OptionsV1.3, May How to Set Up and Test Basic Wireless Connectivity V1.3, May How to Configure WEP How to Configure WPA-PSK or WPA2-PSK Wireless Security Click the Turn Access Control On check box How to Restrict Wireless Access by MAC AddressV1.3, May V1.3, May Blocking Access to Internet Sites Chapter Content FilteringContent Filtering Overview Blocking Access to Internet Services V1.3, May Blocking Services by IP Address Range Scheduling When Blocking Will Be EnforcedConfiguring a User Defined Service Log entry descriptions Viewing Logs of Web Access or Attempted Web AccessLog action buttons Configuring E-Mail Alert and Web Access Log Notifications V1.3, May Viewing Wireless Router Status Information Chapter MaintenanceThis screen shows the following parameters Wireless Router Status FieldsWireless port of the router. The default is Netgear Region Router Statistics Items Connection Status ItemsViewing a List of Attached Devices Configuration File ManagementErasing the Configuration Backing Up and Restoring the ConfigurationUpgrading the Router Software V1.3, May Changing the Administrator Password V1.3, May Configuring Advanced Wireless Settings Advanced Configuration of the RouterPossibility, leave this checkbox unselected Wireless Card Access List Wireless Card Access Setup Configuring Port Triggering and Port Forwarding V1.3, May Click Add Service Configuring Port Forwarding to Local Servers Click the Add Custom Service button Adding a Custom ServiceMultiple Computers for Internet Gaming Editing or Deleting a Port Forwarding EntryLocal Web and FTP Server Example Connecting Automatically, as Required Configuring the WAN Setup OptionsResponding to a Ping on the Internet WAN Port Setting Up a Default DMZ ServerDisabling the SPI Firewall Setting the MTU Size Using the LAN IP Setup OptionsConfiguring LAN TCP/IP Setup Parameters Using Address Reservation Using the Router as a Dhcp serverUsing a Dynamic DNS Service Select the Use a Dynamic DNS Service check box Configuring Static Routes V1.3, May Select the Turn Remote Management On check box Enabling Remote Management AccessV1.3, May Using Universal Plug and Play UPnP V1.3, May V1.3, May Troubleshooting Quick Tips Chapter TroubleshootingBe sure to restart your network in this sequence Make sure the Ethernet cables are securely pluggedBasic Functioning Make sure the network settings of the computer are correctPower Light Not On LAN or WAN Port Lights Not On Lights Never Turn OffTroubleshooting the Web Configuration Interface Troubleshooting the ISP Connection Testing the LAN Path to Your Router Troubleshooting a TCP/IP Network Using a Ping UtilityTesting the Path from Your Computer to a Remote Device Restoring the Default Configuration and Password Problems with Date and Time V1.3, May Factory Default Settings Appendix a Technical SpecificationsWireless Regulatory Compliance General SpecificationsV1.3, May Document Link Appendix B Related DocumentsV1.3, May