NETGEAR WNR834M manual Connection Status Items, Router Statistics Items

Page 46

NETGEAR RangeMax™ NEXT Wireless Router WNR834M Reference Manual

This screen shows the following statistics:.

Table 5-2:

Connection Status Items

 

 

 

Item

 

Description

 

 

 

IP Address

 

The WAN (Internet) IP Address assigned to the router.

 

 

 

Subnet Mask

 

The WAN (Internet) Subnet Mask assigned to the router.

 

 

 

Default Gateway

 

The WAN (Internet) default gateway the router communicates with.

 

 

 

DNS Server

 

The IP address of the DNS server which provides network name to IP address

 

 

translation.

 

 

 

Click the Show Statistics button to display router usage statistics, as shown below.

Figure 5-3

This screen shows the following statistics:

Table 5-3:

Router Statistics Items

 

 

 

Item

 

Description

 

 

 

System Up Time

 

The amount of time since the router was last restarted.

Port

 

The statistics for the WAN (Internet) and LAN (local) ports. For each port, the screen

 

 

displays:

Status

 

The link status of the port.

TxPkts

 

The number of packets transmitted on this port since reset or manual clear.

RxPkts

 

The number of packets received on this port since reset or manual clear.

Collisions

 

The number of collisions on this port since reset or manual clear.

Tx B/s

 

The current transmission (outbound) bandwidth used on the WAN and LAN ports.

Rx B/s

 

The current reception (inbound) bandwidth used on the WAN and LAN ports.

 

 

 

5-4

 

Maintenance

v1.3, May 2006

Image 46
Contents NETGEAR, Inc Trademarks Statement of ConditionsEuropean Union Statement of Compliance Bestätigung des Herstellers/Importeurs Certificate of the Manufacturer/ImporterCustomer Support Voluntary Control Council for Interference Vcci StatementWorld Wide Web V1.3, May Contents Chapter Content Filtering Appendix a Technical Specifications V1.3, May Audience, Scope, Conventions, and Formats Chapter About This ManualTypographical Conventions How to Print this Manual How to Use This ManualManual Scope Revision History Publication Revision HistoryV1.3, May Package Contents Chapter IntroductionFront of the Wireless Router Status LightBack of the Wireless Router How to Access the Wireless Router Again Later Installing the WNR834M routerRangeMax Next Wireless Router WNR834M Online Setup Manuals V1.3, May Maintenance and Support Chapter Wireless Configuration Observing Performance, Placement, and Range GuidelinesImplementing Appropriate Wireless Security V1.3, May Default Factory Settings If WPA-PSK or WPA2-PSK Authentication is UsedUnderstanding Wireless Settings Basic Wireless Security Options WEPV1.3, May How to Set Up and Test Basic Wireless Connectivity V1.3, May How to Configure WEP How to Configure WPA-PSK or WPA2-PSK Wireless Security How to Restrict Wireless Access by MAC Address Click the Turn Access Control On check boxV1.3, May V1.3, May Content Filtering Overview Chapter Content FilteringBlocking Access to Internet Sites Blocking Access to Internet Services V1.3, May Configuring a User Defined Service Scheduling When Blocking Will Be EnforcedBlocking Services by IP Address Range Viewing Logs of Web Access or Attempted Web Access Log entry descriptionsLog action buttons Configuring E-Mail Alert and Web Access Log Notifications V1.3, May Chapter Maintenance Viewing Wireless Router Status InformationWireless Router Status Fields This screen shows the following parametersWireless port of the router. The default is Netgear Region Connection Status Items Router Statistics ItemsConfiguration File Management Viewing a List of Attached DevicesBacking Up and Restoring the Configuration Erasing the ConfigurationUpgrading the Router Software V1.3, May Changing the Administrator Password V1.3, May Advanced Configuration of the Router Configuring Advanced Wireless SettingsPossibility, leave this checkbox unselected Wireless Card Access List Wireless Card Access Setup Configuring Port Triggering and Port Forwarding V1.3, May Click Add Service Configuring Port Forwarding to Local Servers Adding a Custom Service Click the Add Custom Service buttonLocal Web and FTP Server Example Editing or Deleting a Port Forwarding EntryMultiple Computers for Internet Gaming Configuring the WAN Setup Options Connecting Automatically, as RequiredDisabling the SPI Firewall Setting Up a Default DMZ ServerResponding to a Ping on the Internet WAN Port Using the LAN IP Setup Options Setting the MTU SizeConfiguring LAN TCP/IP Setup Parameters Using the Router as a Dhcp server Using Address ReservationUsing a Dynamic DNS Service Select the Use a Dynamic DNS Service check box Configuring Static Routes V1.3, May Enabling Remote Management Access Select the Turn Remote Management On check boxV1.3, May Using Universal Plug and Play UPnP V1.3, May V1.3, May Be sure to restart your network in this sequence Chapter TroubleshootingTroubleshooting Quick Tips Make sure the Ethernet cables are securely pluggedPower Light Not On Make sure the network settings of the computer are correctBasic Functioning Lights Never Turn Off LAN or WAN Port Lights Not OnTroubleshooting the Web Configuration Interface Troubleshooting the ISP Connection Troubleshooting a TCP/IP Network Using a Ping Utility Testing the LAN Path to Your RouterTesting the Path from Your Computer to a Remote Device Restoring the Default Configuration and Password Problems with Date and Time V1.3, May Appendix a Technical Specifications Factory Default SettingsWireless General Specifications Regulatory ComplianceV1.3, May Appendix B Related Documents Document LinkV1.3, May