NETGEAR WAG302 manual Appendix C Command Line Reference, Command Sets

Appendix C

Command Line Reference

The WAG302 ProSafe Dual Band Wireless Access Point (AP) can be configured either through the command line interface (CLI), a Web browser, or an MIB browser. The CLI allows viewing and modification of the configuration from a terminal or PC through a telnet connection.

Command Sets

get set del keyword		Description
--- --- --- ----------------------		-------------------------------
[X] [X]	time	--current system time
[X]	-now
[X] [X]	-zone	--time zone
[X] [X]	‘-daylight saving	--daylight saving
[X] [X]	system	--system firmware version
[X]	-version
[X] [X]	-apname	--system name
[X]	-macaddr	--system MAC address
[X] [X]	-country	--country/region
[X] [X]	-dhcpclient	--system dhcp client
[X] [X]	-ipaddr	--system IP address
[X] [X]	-netmask	--system network mask
[X] [X]	-gateway	--system gateway
[X] [X]	-dns	--primary system DNS server
[X] [X]	-primary
[X] [X]	‘-secondary	--secondary system DNS server
[X] [X]	-stp	--enable spanning tree protocol
[X]	‘-ethstats	--ethernet statistics
[X] [X]	dhcp server	--enable DHCP server
[X] [X]	-dhcpserver
[X] [X]	-anyip	--accept static IP (AnyIP function)
[X] [X]	-ipstart	--starting IP address
[X] [X]	-ipend	--ending IP address
[X] [X]	-netmask	--network mask
[X] [X]	-gateway	--gateway
[X] [X]	-dns	--primary DNS server
[X] [X]	-primary
[X] [X]	‘-secondary	--secondary DNS server

Command Line Reference C-1

202-10078-01