
Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302
From the main menu Management heading, click the Backup/Restore Settings link to bring up the menu shown below.
Figure 4-6: Settings Backup menu
The three options displayed are described in the following sections:
Saving and Retrieving the Configuration
The Backup/Restore Settings menu allows you to save or retrieve a file containing your wireless access point’s configuration settings.
To save your settings, click the Save button. Your browser will extract the configuration file from the wireless access point and prompts you for a location on your computer to store the file. You can give the file a meaningful name at this time, such as WAG302.cfg.
To restore your settings from a saved configuration file, enter the full path to the file on your computer or click the Browse button to locate the file. When you have located it, click the Retrieve button to upload the file. After completing the upload, the WAG302 will reboot automatically.
Restoring the WAG302 to the Factory Default Settings
It is sometimes desirable to restore the wireless access point to the factory default settings. This can be done by using the Restore function, which restores all factory settings. After a restore, the wireless access point's password will be password, the WAG302's DHCP client is enabled, the default LAN IP address is 192.168.0.230, and the access point name is reset to the name printed on the label on the bottom of the unit.
Management |