NETGEAR WAG302 manual Viewing a List of Attached Devices, Refresh button

Reference Manual for the NETGEAR ProSafe Dual Band Wireless Access Point WAG302

Table 4-1.	Statistics Fields (continued)
Field		Description
Wireless 11b/g		Received/Transmitted
Unicast Packets		The Unicast packets sent since the WAG302 was restarted.
Broadcast Packets		The Broadcast packets sent since the WAG302 was restarted.
Multicast Packets		The Multicast packets sent since the WAG302 was restarted.
Total Packets		The Wireless packets sent since the WAG302 was restarted.
Total Bytes		The Wireless bytes sent since the WAG302 was restarted.
Refresh button		Click the Refresh button to update the statistics on this screen.

Viewing a List of Attached Devices

The Available Wireless Station List contains a table of all IP devices associated with the wireless access point in the wireless network defined by the Wireless Network Name (SSID). From the main menu of the browser interface, under the Information heading, click the Available Wireless Station List link to view the list, shown below.

For each device, the table shows the Station ID, MAC address, IP Address, and Status (whether the device is allowed to communicate with the wireless access point or not).

Note that if the wireless access point is rebooted, the table data is lost until the wireless access point rediscovers the devices. To force the wireless access point to look for associated devices, click the Refresh button.

Note: A wireless network can include multiple wireless access points, all using the same network name (SSID). This enables extending the reach of the wireless network and allows users to roam from one access point to another, providing seamless network connectivity. Under these circumstances, be aware that only the stations associated with this access point will be presented in the Available Station List.

Management 4-9

202-10078-01