NETGEAR MBRN3000-100NAS user manual Viewing Attached Devices

Page 38

Mobile Broadband Wireless-N Router MBRN3000

Viewing Attached Devices

The Attached Devices screen shows all IP devices that the router discovered on the local network. From the main menu, under the Maintenance heading, select Attached Devices:

For each device, the table shows the IP address, device name if available, and the Ethernet MAC address. If the router is rebooted, this data is lost until the router rediscovers the devices. To force the router to look for attached devices, click the Refresh button.

Viewing, Selecting, and Saving Logged Information

The router logs security-related events such as denied incoming service requests, hacker probes, and administrator logins. If you enabled content filtering in the Block Sites screen, the Logs screen can show you when someone on your network tries to access a blocked site.

On the router menu, below the Content Filtering heading, select Logs to display this screen:

Note: You can enable e-mail notification to receive these logs in an e-mail

message. See “Enabling Security Event E-mail Notification” on

page 39.

Chapter 4: Managing Your Network 37

Image 38
Contents Mobile Broadband Wireless-N Router MBRN3000 Mobile Broadband Wireless-N Router MBRN3000 Statement of Conditions Technical Support NETGEAR, IncTrademarks Revision History Publication Part NumberTable of Contents Advanced Factory Default Settings Technical Specifications USB Hardware FeaturesRouter Front Panel LAN WPSRouter Back Panel Router LabelUsing the Router Stand Logging In to Your RouterTo log in to the router To manually configure your Internet settings Accessing the Setup Wizard After InstallationManually Configuring Your Internet Settings Fields and Checkboxes Description Wireless Network Configuration Planning Your Wireless NetworkWireless Placement and Range Guidelines Wireless Security OptionsManually Configuring Your Wireless Settings Wireless SecurityTo view or manually configure the wireless settings Settings DescriptionWireless Guest Networks To configure a wireless guest networkConfiguring WEP To configure WEP data encryptionTo configure WPA or WPA2 in the router Using Push N Connect WPS to Configure Your Wireless NetworkConfiguring WPA, WPA2, or WPA + WPA2 WPS Button To use the router WPS button to add a WPS clientWPS PIN Entry To use a PIN to add a WPS clientAdding Wireless Computers that Do Not Support WPS Changing Wireless Settings for the NetworkProtecting Access to Your Mobile Broadband Wireless-N Router Changing the Built-In PasswordChanging the Administrator Login Time-out Blocking Sites and KeywordsKeyword Result XXXBlocking Services Setting Your Time Zone SchedulingScheduling Firewall Services Live Parental ControlsWeb-based GUI Backing Up, Restoring, or Erasing Your Settings Backing Up the Configuration to a FileTo erase the configuration Restoring the Configuration from a FileErasing the Configuration Upgrading the Router FirmwareMobile Broadband Wireless-N Router MBRN3000 Hsdpa Router StatusField Description ImsiWireless Settings DhcpShowing Statistics Connection Status Viewing Attached Devices Viewing, Selecting, and Saving Logged InformationExamples of Log Messages Field or button DescriptionActivation and Administration Enabling Security Event E-mail NotificationSelect the Turn E-mail Notification On check box Running Diagnostic Utilities and Rebooting the RouterTo receive alerts and logs by e-mail Enabling Remote Management ScanConfiguring Remote Management Http//134.177.0.1238080Advanced Wireless Settings AdvancedHiding your wireless network name Ssid Wireless Station Access ControlTurning off wireless connectivity completely Restricting Access by MAC Address To restrict access based on MAC addressesPort Forwarding To set up port forwardingPort Forwarding and Port Triggering To view or change the WAN Setup WAN SetupTo set up port triggering Port TriggeringSetting Up a Default DMZ Server Setting DescriptionTo view or change the LAN IP Setup LAN IP SettingsTo assign a computer or server to be a default DMZ server Dhcp Settings LAN TCP/IPTo edit or delete a reserved address entry Reserved IP AddressesTo reserve an IP address Click Edit or DeleteDynamic DNS Configuring Dynamic DNSSelect the Use a Dynamic DNS Service check box Using Static Routes Static Route ExampleTo configure static routes Universal Plug and Play UPnPTraffic Meter To monitor traffic on your router Troubleshooting Basic FunctioningTroubleshooting Access to the Router Main Menu ActionTroubleshooting the ISP Connection Connecting to the InternetTesting the LAN Path to Your Router Troubleshooting a TCP/IP Network Using the Ping UtilityTroubleshooting Internet Browsing To ping the router from a PC running Windows 95 or laterTesting the Path from Your Computer to a Remote Device Request timed outRestoring the Default Configuration and Password Problems with Date and TimeLAN IP Factory Default SettingsFeature Default Behavior DMZList All wireless stations allowed NetgearTCP/IP, Dhcp Technical SpecificationsTechnical Specifications WAN USBRelated Documents Notification of Compliance Regulatory Compliance InformationΣυμμορφωνεται Προσ ΤΙΣ Ουσιωδεισ Απαιτησεισ ΚΑΙ ΤΙΣ Λοιπεσ Σχετικεσ Διαταξεισ ΤΗΣ Οδηγιασ 1999/5/ΕΚFCC Requirements for Operation in the United States FCC Information to UserFCC Caution Voluntary Control Council for Interference Vcci StatementIndex Index