NETGEAR MBRN3000-100NAS user manual Enabling Remote Management, Scan

Page 42

Mobile Broadband Wireless-N Router MBRN3000

•Display the routing table to identify what other routers the router is communicating with.

•Reboot the router to enable new network configurations to take effect or to clear problems with the router’s network connection.

From the main menu, under the Maintenance heading, select Diagnostics:

•Ping: Ping an IP address.

•Lookup: A DNS (Domain Name Server) converts the Internet name such as www.netgear.com to an IP address. If you need the IP address of a server on the Internet, you can do a DNS lookup to find the IP address.

•Display: View the internal routing table. Typically, this information is used only by Technical Support.

•Reboot: Shut down and restart the router.

Note: If you reboot the router you will lose your connection. To access the router you will need to log in again after it has finished rebooting.

•Save: Save diagnostic information.

•Scan:

Enabling Remote Management

Using the Remote Management screen, you can allow a user or users on the Internet to configure, upgrade, and check the status of your router.

Chapter 4: Managing Your Network 41

Image 42

Contents Mobile Broadband Wireless-N Router MBRN3000 Mobile Broadband Wireless-N Router MBRN3000 Statement of Conditions Technical Support NETGEAR, IncTrademarks Revision History Publication Part NumberTable of Contents Advanced Factory Default Settings Technical Specifications Hardware Features Router Front PanelUSB LAN WPSRouter Back Panel Router LabelUsing the Router Stand Logging In to Your RouterTo log in to the router Accessing the Setup Wizard After Installation Manually Configuring Your Internet SettingsTo manually configure your Internet settings Fields and Checkboxes Description Wireless Network Configuration Planning Your Wireless NetworkWireless Placement and Range Guidelines Wireless Security OptionsManually Configuring Your Wireless Settings Wireless SecurityTo view or manually configure the wireless settings Settings DescriptionWireless Guest Networks To configure a wireless guest networkConfiguring WEP To configure WEP data encryptionUsing Push N Connect WPS to Configure Your Wireless Network Configuring WPA, WPA2, or WPA + WPA2To configure WPA or WPA2 in the router WPS Button To use the router WPS button to add a WPS clientWPS PIN Entry To use a PIN to add a WPS clientAdding Wireless Computers that Do Not Support WPS Changing Wireless Settings for the NetworkProtecting Access to Your Mobile Broadband Wireless-N Router Changing the Built-In PasswordChanging the Administrator Login Time-out Blocking Sites and KeywordsKeyword Result XXXBlocking Services Setting Your Time Zone SchedulingScheduling Firewall Services Live Parental ControlsWeb-based GUI Backing Up, Restoring, or Erasing Your Settings Backing Up the Configuration to a FileTo erase the configuration Restoring the Configuration from a FileErasing the Configuration Upgrading the Router FirmwareMobile Broadband Wireless-N Router MBRN3000 Hsdpa Router StatusField Description ImsiWireless Settings DhcpShowing Statistics Connection Status Viewing Attached Devices Viewing, Selecting, and Saving Logged InformationExamples of Log Messages Field or button DescriptionActivation and Administration Enabling Security Event E-mail NotificationRunning Diagnostic Utilities and Rebooting the Router To receive alerts and logs by e-mailSelect the Turn E-mail Notification On check box Enabling Remote Management ScanConfiguring Remote Management Http//134.177.0.1238080Advanced Wireless Settings AdvancedWireless Station Access Control Turning off wireless connectivity completelyHiding your wireless network name Ssid Restricting Access by MAC Address To restrict access based on MAC addressesTo set up port forwarding Port Forwarding and Port TriggeringPort Forwarding To view or change the WAN Setup WAN SetupTo set up port triggering Port TriggeringSetting Up a Default DMZ Server Setting DescriptionLAN IP Settings To assign a computer or server to be a default DMZ serverTo view or change the LAN IP Setup Dhcp Settings LAN TCP/IPTo edit or delete a reserved address entry Reserved IP AddressesTo reserve an IP address Click Edit or DeleteConfiguring Dynamic DNS Select the Use a Dynamic DNS Service check boxDynamic DNS Using Static Routes Static Route ExampleTo configure static routes Universal Plug and Play UPnPTraffic Meter To monitor traffic on your router Troubleshooting Basic FunctioningTroubleshooting Access to the Router Main Menu ActionTroubleshooting the ISP Connection Connecting to the InternetTesting the LAN Path to Your Router Troubleshooting a TCP/IP Network Using the Ping UtilityTroubleshooting Internet Browsing To ping the router from a PC running Windows 95 or laterTesting the Path from Your Computer to a Remote Device Request timed outRestoring the Default Configuration and Password Problems with Date and TimeLAN IP Factory Default SettingsFeature Default Behavior DMZList All wireless stations allowed NetgearTCP/IP, Dhcp Technical SpecificationsTechnical Specifications WAN USBRelated Documents Notification of Compliance Regulatory Compliance InformationΣυμμορφωνεται Προσ ΤΙΣ Ουσιωδεισ Απαιτησεισ ΚΑΙ ΤΙΣ Λοιπεσ Σχετικεσ Διαταξεισ ΤΗΣ Οδηγιασ 1999/5/ΕΚFCC Requirements for Operation in the United States FCC Information to UserFCC Caution Voluntary Control Council for Interference Vcci StatementIndex Index