NETGEAR MBRN3000-100NAS user manual Traffic Meter

Page 56

Mobile Broadband Wireless-N Router MBRN3000

1.Select UPnP on the main menu to display the UPnP screen:

2.Fill in the settings on the UPnP screen:

Turn UPnP On. UPnP can be enabled or disabled for automatic device configuration. The default setting for UPnP is enabled. If disabled, the router will not allow any device to automatically control the resources, such as port forwarding (mapping), of the router.

Advertisement Period. The advertisement period is how often the router advertises (broadcasts) its UPnP information. This value can range from 1 to 1440 minutes. The default period is for 30 minutes. Shorter durations ensure that control points have current device status at the expense of additional network traffic. Longer durations might compromise the freshness of the device status but can significantly reduce network traffic.

Advertisement Time To Live. The time to live for the advertisement is measured in hops (steps) for each UPnP packet sent. A hop is the number of steps allowed to propagate for each UPnP advertisement before it disappears. The number of hops can range from 1 to 255. The default value for the advertisement time to live is 4 hops, which should be fine for most home networks. If you notice that some devices are not being updated or reached correctly, then it might be necessary to increase this value a little.

UPnP Portmap Table. The UPnP Portmap Table displays the IP address of each UPnP device that is currently accessing the router and which ports (internal and external) that device has opened.

3.To save, cancel your changes, or refresh the table:

Click Apply to save the new settings to the router.

Click Cancel to disregard any unsaved changes.

Click Refresh to update the portmap table and to show the active ports that are currently opened by UPnP devices.

Traffic Meter

Traffic Metering allows you to monitor the volume of Internet traffic passing through your router’s Internet port. With the Traffic Meter utility, you can set limits for traffic volume, set a monthly limit, and get a live update of traffic usage.

Chapter 5: Advanced 55

Image 56
Contents Mobile Broadband Wireless-N Router MBRN3000 Mobile Broadband Wireless-N Router MBRN3000 Technical Support NETGEAR, Inc TrademarksStatement of Conditions Revision History Publication Part NumberTable of Contents Advanced Factory Default Settings Technical Specifications USB Hardware FeaturesRouter Front Panel LAN WPSRouter Back Panel Router LabelUsing the Router Stand Logging In to Your RouterTo log in to the router To manually configure your Internet settings Accessing the Setup Wizard After InstallationManually Configuring Your Internet Settings Fields and Checkboxes Description Wireless Network Configuration Planning Your Wireless NetworkWireless Placement and Range Guidelines Wireless Security OptionsManually Configuring Your Wireless Settings Wireless SecurityTo view or manually configure the wireless settings Settings DescriptionWireless Guest Networks To configure a wireless guest networkConfiguring WEP To configure WEP data encryptionTo configure WPA or WPA2 in the router Using Push N Connect WPS to Configure Your Wireless NetworkConfiguring WPA, WPA2, or WPA + WPA2 WPS Button To use the router WPS button to add a WPS clientWPS PIN Entry To use a PIN to add a WPS clientAdding Wireless Computers that Do Not Support WPS Changing Wireless Settings for the NetworkProtecting Access to Your Mobile Broadband Wireless-N Router Changing the Built-In PasswordChanging the Administrator Login Time-out Blocking Sites and KeywordsKeyword Result XXXBlocking Services Setting Your Time Zone SchedulingScheduling Firewall Services Live Parental ControlsWeb-based GUI Backing Up, Restoring, or Erasing Your Settings Backing Up the Configuration to a FileRestoring the Configuration from a File Erasing the ConfigurationTo erase the configuration Upgrading the Router FirmwareMobile Broadband Wireless-N Router MBRN3000 Router Status Field DescriptionHsdpa ImsiWireless Settings DhcpShowing Statistics Connection Status Viewing Attached Devices Viewing, Selecting, and Saving Logged InformationExamples of Log Messages Field or button DescriptionActivation and Administration Enabling Security Event E-mail NotificationSelect the Turn E-mail Notification On check box Running Diagnostic Utilities and Rebooting the RouterTo receive alerts and logs by e-mail Enabling Remote Management ScanConfiguring Remote Management Http//134.177.0.1238080Advanced Wireless Settings AdvancedHiding your wireless network name Ssid Wireless Station Access ControlTurning off wireless connectivity completely Restricting Access by MAC Address To restrict access based on MAC addressesPort Forwarding To set up port forwardingPort Forwarding and Port Triggering WAN Setup To set up port triggeringTo view or change the WAN Setup Port TriggeringSetting Up a Default DMZ Server Setting DescriptionTo view or change the LAN IP Setup LAN IP SettingsTo assign a computer or server to be a default DMZ server Dhcp Settings LAN TCP/IPReserved IP Addresses To reserve an IP addressTo edit or delete a reserved address entry Click Edit or DeleteDynamic DNS Configuring Dynamic DNSSelect the Use a Dynamic DNS Service check box Using Static Routes Static Route ExampleTo configure static routes Universal Plug and Play UPnPTraffic Meter To monitor traffic on your router Troubleshooting Basic FunctioningTroubleshooting Access to the Router Main Menu ActionTroubleshooting the ISP Connection Connecting to the InternetTroubleshooting a TCP/IP Network Using the Ping Utility Troubleshooting Internet BrowsingTesting the LAN Path to Your Router To ping the router from a PC running Windows 95 or laterTesting the Path from Your Computer to a Remote Device Request timed outRestoring the Default Configuration and Password Problems with Date and TimeFactory Default Settings Feature Default BehaviorLAN IP DMZList All wireless stations allowed NetgearTechnical Specifications Technical SpecificationsTCP/IP, Dhcp WAN USBRelated Documents Notification of Compliance Regulatory Compliance InformationΣυμμορφωνεται Προσ ΤΙΣ Ουσιωδεισ Απαιτησεισ ΚΑΙ ΤΙΣ Λοιπεσ Σχετικεσ Διαταξεισ ΤΗΣ Οδηγιασ 1999/5/ΕΚFCC Requirements for Operation in the United States FCC Information to UserFCC Caution Voluntary Control Council for Interference Vcci StatementIndex Index