Provisioning Access Points
Chapter 2
Depending on the Aruba AP 60/61 status, you will see one of the following on your terminal:
zAutoboot
APBoot 1.2.1 (Apr 7 2004 - 08:54:57)
CPU: AR2313
Board: Merlot Local Bus at 90 MHz
DRAM: 32 MB
POST: passed
FLASH: 4 MB
Net: en0 lo0
Hit any key to stop autoboot: 0
To access the apboot prompt, press any key (such as <Enter>) before the timer expires. If the countdown expires before you can interrupt it, turn the device off and then back on.
zTFTP time
Loading FLASH image...
Verifying checksum... failed!
BOOTP broadcast 1
DHCP IP address: 10.1.2.250
DHCP subnet mask: 255.255.255.0
DHCP def gateway: 10.1.2.1
DHCP DNS server: 10.1.1.2
DHCP DNS domain: arubanetworks.com
DHCP Aruba server: 10.1.2.11
Loading elf file: 10.1.2.11:mips.ari
Loading: T T T T T T T T T
Retry count exceeded; starting again
Press
Once the apboot prompt is displayed, perform provisioning as described in the next section of this manual.
16 Aruba AP 60/61 | 0500160 |
Installation Guide | December 2005 |