Troubleshooting
Appendix A
AP Support
Access Levels
zUser Access
User access is a low security level, featuring only the most basic commands. It is available without any additional login after the AP has booted.
zPrivileged Access
User Commands
zping <hostIP address>
Verify IP connectivity between the AP and the host address.
zroute
Display the contents of the AP route table.
zifconfig
Display the AP’s IP address settings.
zenable <privileged password>
Access the AP Support privileged mode.
Privileged Commands
In addition to the user commands, the following commands are available upon successfully entering the privileged mode:
zps
zshow [configstatsversion]
NOTE: These commands should be used only as directed by Aruba Customer Support.
34 Aruba AP 60/61 | 0500160 |
Installation Guide | December 2005 |