D-Link D-Link DKVM-16 manual Hardware Installation

Page 11

Hardware Installation (Continued)

Step 11

Now power up all computers simultaneously. The first computer will be shown on the monitor. You may check to see if the mouse, keyboard, and monitor work after the computer has booted up. If this is OK, use the “Select” button to choose the next computer and verify the functionality in the same manner. If you find errors, recheck all cables for proper connections before going to the trouble-shooting section of this manual.

Note: Please do not switch the PC ports (i.e. do not press the “push” button of the KVM switch or run Hot Key) while the computers are in the boot-up process. Nor- mally, during the boot-up process, each PC will communicate with the keyboard and mouse. If you switch PC ports on the KVM at this time, it will cause communi-

cation errors or initialization failures between the PC and keyboard or mouse.

11

Image 11
Contents Link DKVM-16 Contents Package Contents Introduction Features and Benefits Rear Panel Layout Hardware InstallationFront Panel Layout Hardware Installation Hardware Installation Back of PC Repeat steps 5 through 8 for the remainder of the computers Hardware Installation Display LEDs Using the DKVM-16Power On State of the DKVM-16 Push ButtonsKeyboard Hot Keys Reset ButtonHot Key Commands Hot Key Commands Scroll Lock = Auto Scan Daisy-Chaining the DKVM-16 Hot Plug Bank number On Screen Display OperationOn Screen Display Operation Arrow Keys Monitor/VideoProblems TroubleshootingGeneral Problems PS/2 Mouse Problems Problems with Computers Using Serial Mouse Output TroubleshootingProblems with the Power Supply Specifications Page Page Page Technical Support