D-Link D-Link DKVM-16 manual Hardware Installation

Page 7

Hardware Installation (Continued)

WARNING

Make sure that all of your computers are powered off before attempting to connect the cabling to avoid damage to your DKVM-16

Step 1

Find a convenient place to place your DKVM-16. Its 19" rack mount form fac- tor makes it mountable on a 19" rack. When mounting to a rack, attach the included brackets to the side panels of the DKVM-16. Take note of the length of your cables so that your computers, DKVM-16, keyboard, mouse, and moni- tor are distanced properly.

Step 2

Connect the monitor console to the DKVM-16. Connect the attached cable, or the one included with your monitor, to the HD DB-15 female port, labeled with the monitor symbol at the CONSOLE connector on the back of the DKVM-16.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Link DKVM-16 Contents Package Contents Introduction Features and Benefits Front Panel Layout Hardware InstallationRear Panel Layout Hardware Installation Hardware Installation Back of PC Repeat steps 5 through 8 for the remainder of the computers Hardware Installation Display LEDs Using the DKVM-16Power On State of the DKVM-16 Push ButtonsHot Key Commands Reset ButtonKeyboard Hot Keys Hot Key Commands Scroll Lock = Auto Scan Daisy-Chaining the DKVM-16 Hot Plug Bank number On Screen Display OperationOn Screen Display Operation Arrow Keys General Problems TroubleshootingMonitor/VideoProblems PS/2 Mouse Problems Problems with Computers Using Serial Mouse Output TroubleshootingProblems with the Power Supply Specifications Page Page Page Technical Support
Top Page Image Contents