D-Link D-Link DKVM-16 manual Scroll Lock = Auto Scan

Using the DKVM-16 (Continued)

Hot Key Commands (Continued)

Scroll Lock

+

Scroll Lock

+

S

= Auto Scan

Note:

1.If you have already set up the scan mode command, DKVM-16 will issue one beep to confirm each hop from one PC port to the next.

2.To exit Auto Scan Mode, press any key or the SPACE bar.

Scroll Lock

+

Scroll Lock

+

R

= OSD default

This screen will appear on your monitor

Note: The Rom reflash command will take approximately 1-2 minutes.

Scroll Lock

+

Scroll Lock

+

F

= Search PC name

This screen will appear on your monitor

Note: The Search PC name command starts with the 1st PC port.

Scroll Lock

+

Scroll Lock

+ Space Bar = On Screen Display Manual

15