On Screen Display Operation (Continued)
CHANGE PASSWORD
The Change Password function allows the user to change the password used to access all connected PC systems. The default password is 8 digits, “00000000”.
The Enter Password window appears when you select this item and press enter. The maximum password is eight digits. After you key in the password and press the Enter key, another window appears to conform your typed pass- word.
You must retype the new password to confirm the password change. The following window appears to confirm the completion of your password change.
CONSOLE ON/OFF
The Console On/Off function lets you select the console access of the KVM switch. If you select “CONSOLE ON”, any sure can use the console. If you select “CONSOLE OFF” (factory default is OFF state), a password must be entered to use the console. When you enter the password and pass the KVM switch authentication, the console will be set to ON. After you finish using the KVM switch, remember to set the CONSOLE On state to OFF to ensure pass- word authentication.
Note: If you reset the KVM switch, or there is a power failure, the CON-
SOLE will be set to the OFF state. | 19 |
|