D-Link D-Link DKVM-16 manual Hardware Installation

Page 8

Hardware Installation (Continued)

Step 3

Connect the keyboard console to the DKVM-16. If you have an AT type key- board, you will need an AT to PS/2 adapter.

Step 4

Connect the mouse console to the 9 pins, you will need to use the 9 to the DKVM-16.

DKVM-16. If you have an older mouse with 5 pin mouse converter that is included with

8

Image 8
Contents Link DKVM-16 Contents Package Contents Introduction Features and Benefits Rear Panel Layout Hardware InstallationFront Panel Layout Hardware Installation Hardware Installation Back of PC Repeat steps 5 through 8 for the remainder of the computers Hardware Installation Using the DKVM-16 Power On State of the DKVM-16Push Buttons Display LEDsKeyboard Hot Keys Reset ButtonHot Key Commands Hot Key Commands Scroll Lock = Auto Scan Daisy-Chaining the DKVM-16 Hot Plug On Screen Display Operation Bank numberOn Screen Display Operation Arrow Keys Monitor/VideoProblems TroubleshootingGeneral Problems PS/2 Mouse Problems Troubleshooting Problems with Computers Using Serial Mouse OutputProblems with the Power Supply Specifications Page Page Page Technical Support