D-Link DI-624S manual Installing the Print Server

5.(See the printed Quick Installation Guide included with the network adapter.)

6.Install the D-Link DWL-G650 wireless Cardbus adapter into a laptop computer. (See the printed Quick Installation Guide included with the DWL-G650.)

7.Install the D-Link DFE-530TX+ adapter into a desktop computer. The four Ethernet LAN ports of the DI-624S are Auto MDI/MDIX and will work with both Straight-Through and Cross-Over cable.

(See the printed Quick Installation Guide included with the DFE-530TX+.)

Connect your printer to the printer port on the DI-624S. Please refer to the quick installation guide for loading the print server software.

Installing the Print Server

To avoid any problems that may arise when you install your USB printer, follow this procedure. If the print server is powered on before a network connection is established, configuration problems may arise.

1.Before connecting your printer to the DI-624S, make sure that your printer is functioning properly.

2.Once you have made sure that it is working properly, turn off the power to the printer.

3.Confirm that your computer network is functioning properly.

4.Connect the DI-624S to your network, using a standard Ethernet cable. Leave the router powered off.

5.While the printer is still powered off, connect the printer to one of the available USB slots at the rear of the router.

6.Power on your USB printer.

7.Plug the power adapter into the available power adapter slot at the back of the router.

8.Plug the other end of the power adapter into an available power outlet. This will supply electricity to the Router since there is no external power switch. The corresponding green USB LED at the front of the router should light green, indicating a valid connection to the router.

To configure the router for use on your LAN, please go to the Advanced section of this manual, under the heading Home > LAN.

12