D-Link DI-624S manual Using the Configuration Wizard, 192.168.0.1

Using the Configuration Wizard

Whenever you want to configure your 192.168.0.1

network or the DI-624S, you can access the Configuration Menu by opening the web-browser and typing in the IP Address of the DI-624S. The DI-624S default IP Address is shown to the right:

•

•

•

•

•

Open the web browser

Type in the IP Address of the Router (http://192.168.0.1)

Type admin in the User Name field

Leave the Password blank Click OK

The Home > Wizard screen will appear. Please refer to the Quick Installation Guide for more information regarding the Setup Wizard.

These buttons appear on most of the configuration screens in this section. Please click on the appropriate button at the bottom of each screen after you have made a configuration change.

Note: if you have changed the default IP Address assigned to the DI-624S, make sure to enter the correct IP Address.

Clicking this button will save configured settings to the router.

Clicking Cancel will clear changes made to the current page.

Clicking Help will provide the user with helpful information about the current window.

Click refresh will refresh the statistics of the

current window. 13