D-Link DI-624S manual Dynamic IP Address

Using the Configuration Menu (continued)

Dynamic IP Address

Dynamic	Choose Dynamic IP Address to obtain IP address information
	automatically from your ISP. This option should be selected if your ISP
	has not supplied you with an IP address. This option is commonly used
	for Cable modem services.
Host Name	The Host Name is optional but may be required by some ISPs. The
	default host name is the device name of the Router and may be
	changed.
MAC Address	The default MAC Address is set to the WAN’s physical interface MAC
	address on the Broadband Router. It is not recommended that you
	change the default MAC address unless required by your ISP.
Clone MAC Address	The default MAC address is set to the WAN’s physical interface MAC
	address on the Broadband Router. You can use the “Clone MAC
	Address” button to copy the MAC address of the Ethernet Card
	installed by your ISP and replace the WAN MAC address with the MAC
	address of the router. It is not recommended that you change the
	default MAC address unless required by your ISP.
Primary/Secondary	Enter a DNS Address if you wish not to use the address provided by
DNS Address	your ISP.
MTU	Enter an MTU value only if required by your ISP. Otherwise, leave it at
	the default setting.

19