Using the Configuration Menu (continued)
Home > WAN > PPPoE
Choose PPPoE (Point to Point Protocol over Ethernet) if your ISP uses a PPPoE connection. Your ISP will provide you with a username and password. This option is typically used for DSL services. Select Dynamic PPPoE to obtain an IP address automatically for your PPPoE connection. Select Static PPPoE to use a static IP address for your PPPoE connection.
PPPoE | Choose this option if your ISP uses PPPoE. (Most DSL users will |
| select this option.) |
| Dynamic PPPoE Choose this option to receive an IP Address |
| automatically from your ISP. |
| Static PPPoE Choose this option to you have an assigned (static) |
| IP Address. |
Password | Enter The PPPoE user name provided to you by your ISP. |
Retype Password | Retype the password entered in the previous field. |
Service Name | Enter the Service Name provided by your ISP (optional). |
IP Address | This option is only available for Static PPPoE. Enter the static IP |
| address for the PPPoE connection. |
MAC Address | The default MAC Address is set to the WAN’s physical interface MAC |
| address on the Broadband Router. It is not recommended that you |
| change the default MAC address unless required by your ISP. |
20