D-Link DI-624S manual Advanced File Sharing Server Setup, Advanced File Sharing User Setup

Advanced > File Sharing > Server Setup

The Server Setup window is used to configure the router to be a file-sharing device on the network.

Server Setup	Click the corresponding radio button if you wish to enable or
	disable the File Server function on the Router.
Group	Enter the name of the share group on the internal network
	with whom you wish to share files.
Name	Enter the name of the device to be used as the file sharing
	server. As shown in the window above, this should be the
	DI-624S.
Share type	The administrator has two choices of places where to share
	files. If “All USB Disk without authentication” is chosen, the
	administrator will allow outside users access to USB devices
	attached to the router, without the need for authentication.
	“Configured User and Directory” will require outside users
	to be authenticated by the router before gaining access. The
	administrator will need to pre-define user names and
	passwords for these users attempting to access the shared
	files.
	Advanced > File Sharing > User Setup

The User Setup window is used to configure users on the network to gain access to the router. To gain access to this window, the user must first choose the “Configured User and Directory” setting and click Apply. Once returned to the screen, the user may choose this option to be configured. Properly configured users will be listed in the User Lists table at the bottom of the window. Up to 32 users can be configured here. To edit the parameters for a configured user click its corresponding edit icon. To delete the user, click the corresponding delete icon.

28