Advanced > Filters > IP Filters
This window will aid the use in configuring filters for IP addresses. This will deny specified LAN IP addresses or specific ports associated with these LAN IP address from accessing the Internet. Well known ports have already been previously set in the IP Filters List and can be modified by clicking their corresponding edit icon, and simple adding an IP address to the configuration. To access this screen, click the Advanced tab along the top of the configuration window and then the Filters tab to the left hand side.
IP Filters | Choose whether to enable or disable this configuration for IP filtering. |
IP Address | An IP address or range of IP addresses that will be denied access to |
| the Internet. |
Port | A port or range of ports that will be denied access to the Internet. If no |
| port is entered, all ports in this IP range will be denied access to the |
| Internet. |
Protocol Type | The protocol associated with this IP filter. The user may choose |
| between TCP, UDP or Both. |
Schedule | The user may configure time intervals that these IP filters will become |
| active. Clicking the Always radio button will not allow access to these |
| IP filters at any time. The user may set a strict time period by clicking |
| the From radio button and configuring a time period to deny these IP |
| addresses from accessing the Internet. |
39