D-Link DI-624S manual Status Device Info, Lan

Using the Configuration Menu (continued)

Status > Device Info

This page displays the current information for the DI-624S. It will display the LAN, WAN, Wireless 802.11g and Disk Information statistics.

If your WAN connection is set up for a Dynamic IP address then a Release button and a Renew button will be displayed. Use Release to disconnect from your ISP and use Renew to connect to your ISP.

If your WAN connection is set up for PPPoE, a Connect button and a Disconnect button will be displayed. Use Disconnect to drop the PPPoE connection and use Connect to establish the PPPoE connection.

This window will show the DI-624S’s working status:

LAN	MAC Address: MAC address of the DI-624S
	IP Address: LAN/Private IP Address of the DI-624S
	Subnet Mask: LAN/Private Subnet Mask of the DI-624S
	DHCP Server: DHCP Server Status
WAN	MAC Address: MAC address of the DI-624S
	Connection: Displays the current connection for DHCP. This
	field also has two buttons for resetting the DHCP server on
	the Router. DHCP Release – Clicking this button will release
	and reset the DHCP server. All settings configured by DHCP
	will be lost. DHCP Renew – Clicking this button will allow the
	router to renew the DHCP server and automatically configure
	new DHCP settings for the connection.
	IP Address: WAN/Public IP Address

61