D-Link DI-624S manual Tools Admin, Administrator, User, Remote Management

Using the Configuration Menu (continued)

Tools > Admin

At this page, the DI-624S administrator can change the system password. There are two accounts that can access the Broadband Router’s Web-Management interface. They are admin and user. Admin has read/write access while user has read-only access. User can only view the settings but cannot make any changes.

Administrator	admin is the Administrator login name.
Password	Enter the password here and the same password in the
	Confirm Password field. This will be the password that the
	administrator will use to gain access to the configuration
	menu of the device. There is no default password for this
	device.
User	user is the User login name
Password	Enter the password here and the same password in the
	Confirm Password field. This will be the password that the
	users will use to gain access to the configuration menu of the
	device. Users will have limited privileges on this device. There
	is no default password for this device.
Remote Management	Remote management allows the DI-624 to be configured from
	the Internet by a web browser. A username and password is
	still required to access the Web-Management interface. In
	general, only a member of your network can browse the
	built-in web pages to perform Administrator tasks. This
	feature enables you to perform Administrator tasks from the
	remote (Internet) host.
IP Address	The Internet IP address of the computer that has access to
	the Broadband Router. If you input an asterisk (*) into this
	field, then any computer will be able to access the Router.
	Putting an asterisk (*) into this field would present a security
	risk and is not recommended.
Port	The port number used to access the Broadband Router. The
	default port number for web management is 8080.

54