NETGEAR EX6100100NAS user manual Change WiFi Security Settings, Select Setup Wireless Setup

AC750 WiFi Range Extender

4.Select Setup > Wireless Setup.

5.In the Region list, select your region. In some locations, you cannot change this setting.

6.To change the network name (SSID), type a new name in the Name (SSID) field.

The name can be up to 32 characters long and is case-sensitive. The default SSID is randomly generated and is on the product label. If you change the name, make sure to write down the new name and keep it in a safe place.

7.To change the wireless channel, select a number in the Channel list.

In some regions, not all channels are available. Do not change the channel unless you experience interference (shown by lost connections or slow data transfers). If this happens, experiment with different channels to see which is the best.

When you use multiple access points, it is better if adjacent access points use different channels to reduce interference. The recommended channel spacing between adjacent access points is four channels (for example, use Channels 1 and 5, or 6 and 10).

8.To change the mode, select it from the Wireless Mode list. Your settings are saved.

If you connected wirelessly to the network and you changed the SSID, you are disconnected from the network.

Change WiFi Security Settings

NETGEAR strongly recommends that you use security to protect your WiFi network. WPA2 uses the newest standard for the strongest security, but some older computers and wireless

Manage the Extender Network and Settings

24