NETGEAR EX6100100NAS user manual Front Panel and Side Panel LEDs and Buttons, Wps Led

Page 6

AC750 WiFi Range Extender

Front Panel and Side Panel LEDs and Buttons

The front panel has LEDs. The side panel has a switch, buttons, and an Ethernet port.

	Router Link LED
	Router Arrow LED
	Client Arrow LED	Access Point/Extender switch
	Client Link LED	Access Point/Extender switch
	Client Link LED	Power On/Off button
	Power LED	Power On/Off button
	WPS LED	WPS button
	WPS LED	Factory Reset button
		Factory Reset button
		Ethernet port

Figure 1. Extender front panel and side panel

Table 1. LEDs

LED	Description

Router Link LED	This LED indicates the connection between the extender and the router
	or access point.

• Solid green. Best connection.

•Solid amber. Good connection.

•Solid red. Poor connection.

•Off. No connection.

Client Link LED This LED indicates the connection between the extender and a computer or mobile device.

•Solid green. Best connection.

•Solid amber. Good connection.

•Solid red. Poor connection.

•Off. No connection.

Power LED	•	Solid amber. The extender is booting.
	•	Solid green. The extender is powered on.

•Off. The extender is powered off.

Get to Know Your Extender

6

Image 6

Contents AC750 WiFi Range Extender Support ComplianceTrademarks Contents FAQs and Troubleshooting Get to Know Your Extender Front Panel and Side Panel LEDs and Buttons WPS LEDWhen to Use Your Extender Use as a WiFi Range ExtenderHow the Extender Works Use as an Access Point Support for the 802.11ac Networking StandardInstall Your Extender Place the Extender Install the Extender as a Range ExtenderConnect to an Existing WiFi Network  To place the extenderExisting WiFi network name. MyNetworkName  To connect with the browser-based Smart SetupInstall Your Extender Install Your Extender Find the Best Location Extender PerformanceConnect a Computer or Device to the Ethernet Port  To connect a computer to the extender Ethernet port  To connect a device to the extender Ethernet portInstall the Extender as an Access Point  To install the extender as an access pointSettings  To log in to the extender after the initial setup Log In After Initial SetupChange the admin Password  To change the password for the extenderSet Up Password Recovery for admin Select Maintenance Set Password To set up password recovery Use Smart Setup to Connect the Extender to a Network Select Smart SetupManage the Extender Network and Settings Manage the Extender Network and Settings Add a WPS Client to the Extender Network Change the Basic WiFi Settings To view or change wireless setup  To add a WPS clientChange WiFi Security Settings Select Setup Wireless Setup To change the WiFi security setting View or Change Advanced Wireless Settings  To view or change the advanced wireless settingsSelect Advanced Wireless Settings View or Change the WPS Settings Set Up a Wireless Access List  To set up and enable the access listView or Change the Internet IP Address Setting Select the Turn Access Control On check box To view or change the Internet Sstup Enable NAT in the Extender Select Setup Internet Setup To enable NAT Manage Profiles  To edit a profileOperating Mode  To delete a profile To view or change the operating mode Select Advanced Operating ModeInternet Surfing Monitor and Maintain the Extender  To recover your password to access the extender Recover the admin PasswordBack Up the Extender Configuration  To back up the extender configuration settingsRestore Saved Configuration Settings Select Maintenance Backup Settings To restore the extender configuration settings Return the Extender to Its Factory Settings Use the Factory Reset Button to Restore Factory Settings To restore factory settings Update the Firmware Erase the Settings and Return to Factory Settings To erase the extender’s current settings View Wired and Wireless Network Devices Select Maintenance Firmware Update To view devices on the network Select Maintenance Attached Devices FAQs and Troubleshooting FAQs User name. adminCannot Log In to the Extender  To get the translated MAC addressCannot Join an Extender WiFi Network Connection was not established to the selected networkSupplemental Information Factory Default Settings Technical SpecificationsAC750 WiFi Range Extender Technical specifications

Related manuals

Manual 20 pages 1.69 Kb