NETGEAR CVG824G manual Gateway Rear Panel

		Wireless Cable Voice Gateway Model CVG824G Reference Manual
Table 1-1. LED Descriptions (continued)
Label	Activity	Description
Wireless	Green Solid	The wireless connection is operating normally.
	Green Blink	Data is being transmitted or received on the wireless interface.
	Off	No wireless link is detected.
USB Port	Green Solid	A USB device is connected to the USB port.
	Off	No USB device is connected.
Voice Ports	Green Solid	Registered with the Call Agent.
(1 and 2)
	Green Blink	There is an active call.
	Green Slow	Phone is “on-hook”; registration with Call Agent is in progress.
	Blink
	Off	No phones are connected to the voice port.
LAN (Local	Green On	The Local port has detected link with a 100 Mbps device.
Area Network)
	Green Blink	Data is being transmitted or received at 100 Mbps.
	Amber On	The Local port has detected link with a 10 Mbps device.
	Amber Blink	Data is being transmitted or received at 10 Mbps.
	Off	No link is detected on this port.

The Gateway Rear Panel

The label on the bottom of the gateway identifies the connections on the rear panel. The rear panel includes the following connections, viewed from left to right, as illustrated in Figure 1-2.

•Wireless Antenna: The gateway ships with the wireless antenna already attached.

•Power: AC power adapter input.

•Reset button: Resets the gateway to its factory defaults.

•Four Ethernet LAN ports: Use these ports to connect local computers.

•USB port: If the USB driver is installed, you can connect a local computer to this port.

•Coaxial cable connector: Attach coaxial cable to the cable service provider’s connection.

•Two Voice/Phone ports: With VoIP service, connect one or two handsets to these ports.

Installing the Gateway 1-3

v1.0, November 2006