Wireless Cable Voice Gateway Model CVG824G Reference Manual
6.Verify the following:
a. | The power light | is lit after turning on the gateway. |
b. | The cable link light | is solid green, indicating a link has been established to the cable |
| network. |
|
c.The LAN LED 
is lit for the port where you connected the computer.
USB Connection
Note: The USB connection option is only available for Windows PCs. Also, Windows 95 does not support USB without special operating system upgrades and patches.
To connect a computer to the USB port on the gateway.
1.You must install the USB driver. Insert your NETGEAR CD into the CD drive of your computer.
a.Connect the USB cable to your modem and plug in the AC power for the gateway.
b.Use the USB cable to connect your computer to the gateway.
c.The Found New Hardware Windows installation wizard prompts for the drivers.
d.Browse to the NETGEAR CD and install the USB driver by clicking through the Windows wizard prompts.
Installing the Gateway |
v1.0, November 2006