NETGEAR CVG824G manual Dynamic IP

Wireless Cable Voice Gateway Model CVG824G Reference Manual

:

Dynamic IP Static IP

Figure 1-5

2.Select Dynamic or Static IP Address:

•If your service provider assigns your IP address through DHCP, select “Dynamic IP.”

•If your service provider assigned you a permanent, fixed (static) IP address for your PC, select “Static IP.” Then enter the IP address that your ISP assigned. Also enter the Static IP Mask (also known as netmask), Gateway IP address and Domain Name Server (DNS) Address.

•The WAN Default Gateway is the ISP’s router to which your gateway will connect.

•A DNS server is a host on the Internet that translates Internet names (such as http://www.netgear.com) to numeric IP addresses. Typically your ISP transfers the IP address of one or two DNS servers to your gateway during login. If the ISP does not transfer an address, you must obtain it from the ISP and enter it manually here. If you enter an address here, you should reboot your PCs after configuring the gateway.

3.Click Apply to accept these settings.

Installing the Gateway 1-9

v1.0, November 2006