NETGEAR CVG824G manual Http//134.177.0.1238080

Wireless Cable Voice Gateway Model CVG824G Reference Manual

Web browser access normally uses the standard HTTP service port 80. For greater security, you can specify a custom port by entering that number in the box provided. Choose a number between 1024 and 65535, but do not use the number of any common service port. The default is 8080, which is a common alternate for HTTP.

5.To make sure that you can use remote management even if the wireless voice gateway is reset, check the Allow Remote Management after Factory Default Reset radio box.

If you do not check this box, you will not be able to remotely access the gateway if you use the Erase feature to revert to the Factory Default settings.

6.Click Apply to have your changes take effect.

When accessing your wireless voice gateway from the Internet, type the WAN IP address of your gateway into your browser, followed by a colon (:) and the port number. For example, if your WAN IP address is 134.177.0.123 and you use port number 8080, type the following in your browser:

http://134.177.0.123:8080

Managing Your Network 4-11

1.0, November 2006