NETGEAR CVG824G WPA2-PSK WiFi Protected Access 2 Pre-Shared Keys, WPA2 WiFi Protected Access

Wireless Cable Voice Gateway Model CVG824G Reference Manual

WPA2-PSK (WiFi Protected Access 2 Pre-Shared Keys)

Not all wireless adapters support WPA2-PSK. Furthermore, client software is required on the client. Windows XP and Windows 2000 with Service Pack 3 or above do include the client software that supports WPA2. Nevertheless, the wireless adapter hardware and driver must also support WPA2. Consult the product document for your wireless adapter and WPA client software for instructions on configuring WPA settings.

To configure WPA2-PSK:

1.From the Wireless Settings page, select WPA2-PSK (Wi-Fi Protected Access 2 Pre-Shared Key).

Figure 2-6

2.In the Pre-Shared Key field under Security Encryption (WPA2-PSK), enter a word or group of printable characters.

The passphrase must be 8 to 63 characters in length. The 256 Bit key used for encryption is generated from this passphrase.

3.Enter the Key Lifetime (in minutes).

4.Click Apply to save your settings.

WPA2 (WiFi Protected Access 2)

To configure WPA2:

1.From the Wireless Settings page, select the WPA2 Security Option.

2-10 Wireless Configuration

v1.0, November 2006