NETGEAR D6300 user manual Factory Settings, Factory default settings

D6300 WiFi DSL Modem Router

Factory Settings

You can return the WiFi DSL modem router to its factory settings. Use the end of a paper clip or some other similar object to press and hold the Restore Factory Settings button on the back of the router for at least 5 seconds. The WiFi DSL modem router resets and returns to the factory settings. Your device returns to the factory configuration settings shown in the following table.

Table 11. Factory default settings

Feature		Default Behavior
Router login	User login URL	www.routerlogin.com or www.routerlogin.net
	User name (case-sensitive)	admin
	Login password (case-sensitive)	password
Internet	WAN MAC address	Use default hardware address
connection
	WAN MTU size	1500
	Port speed	Autosensing
Local network	LAN IP	192.168.0.1
(LAN)
	Subnet mask	255.255.255.0
	DHCP server	Enabled
	DHCP range	192.168.0.2 to 192.168.0.254
	Allow a registrar to configure this	Enabled
	router
	DHCP starting IP address	192.168.0.2
	DHCP ending IP address	192.168.0.254
Local network	DMZ	Disabled
(LAN) continued
	Time zone	GMT for WW except NA and GR, GMT+1 for GR, GMT-8
		for NA
	Time zone adjusted for daylight	Disabled
	savings time
Firewall	Inbound (communications coming	Disabled (except traffic on port 80, the HTTP port)
	in from the Internet)
	Outbound (communications going	Enabled (all)
	out to the Internet)
	Source MAC filtering	Disabled

Supplemental Information

130