NETGEAR user manual D6300 WiFi DSL Modem Router Power On/Off LED

D6300 WiFi DSL Modem Router

Table 1. Power On/Off LED

Icon	LED Activity	Description
	Solid green	The router is ready.
	Solid amber	The router is starting.
	Off	Power is not supplied to the router.
	Restore Factory	LED blinks momentarily when the Restore Factory Settings button on the
	Settings	bottom of the unit is pressed for 6 seconds. The Power LED then blinks red
		three times when the Restore Factory Settings button is released and then
		turns green as the gateway resets to the factory defaults.

Table 2. DSL LED

Icon	LED Activity	Description
	Solid green	You have an ADSL connection. In technical terms, the ADSL port is
		synchronized with an ISP’s network-access device.
	Blinking green	Indicates that the WiFi DSL modem router is negotiating the best possible
		speed on the ADSL line.
	Off	The unit is off or there is no ADSL connection.

Table 3.	Internet LED
Icon	LED Activity	Description
	Solid green	You have an Internet connection. If this connection is dropped due to an
		idle time-out but the connection is still present, the LED stays green. If the
		Internet connection is dropped for any other reason, the LED turns off.
	Solid amber	The Internet (IP) connection failed. See Cannot Access the Internet on
		page 122 for troubleshooting information.
	Off	No Internet connection is detected or the device is in bridge mode (an
		external device handles the ISP connection).
Table 4. Wireless LED
Icon	LED Activity	Description
	Solid blue	There is wireless connectivity.
	Blinking blue	A WPS-capable device is connecting to the device.
	Off	There is no wireless connectivity. You can still plug an Ethernet cable into
		one of the LAN ports to get wired connectivity.

Hardware Setup

15