Actiontec electronic PCMCIA manual Is installed

DataLink V.90 PCMCIA Fax Modem

9.When prompted to select the the manufacturer and model of the Modem, click OK, then Next in the following window. The driver software

is installed.

Note: To verify Windows has found the Modem, select Start, Settings, Control Panel, then Modems.

If dialing into a Windows NT Remote Access Server, or connecting to the Internet, Dial-Up Networking must be configured properly. See the Windows NT. documentation for details.

Next, go to chapter 5, “Installing the Communications Software.”

Windows 2000

To load the Modem’s software drivers onto a computer running Windows 2000:

1.Insert the Modem into the computer’s PCMCIA slot.

2.Turn on the computer.

3.A “Found New Hardware” window appears, stating that Windows has found a “Standard PCMCIA Card Modem.”

4.Right-click My Computer, then select Properties from the pop-up menu.

5.In the “System Properties” window, select Hardware, then Device Manager.

6.When the “Device Manager” window appears, expand the “Modems” section by clicking on the plus sign (“+”).

23