Actiontec electronic PCMCIA manual Windows 95a

Page 38

DataLink V.90 PCMCIA Fax Modem

will work with programs that access COM ports). To solve this problem, first ascertain which version of Windows 95 is running on the computer (see the “Window 95” section of chapter 4, “Installing the Driver Software,” for more details). Select the version and follow the instructions.

Windows 95a

1.Eject the Modem from the computer

2.Select Start, Settings, Control Panel, then double-click Modems.

3.Click Modem once to highlight, then click Remove.

4.Close the “Control Panel” window and return to the Desktop. Do not reboot or restart the computer! Select Start, Programs, then MS-DOS Prompt.

5.The “MS-DOS Prompt” window appears. At the prompt, enter the fol- lowing commands, exactly as shown (<enter> means press the Enter key on the keyboard):

Note: If the Windows Directory is not named “C:/Win- dows,” substitute its new name in the entry below.

cd c:\windows\inf <enter> rename *.inf *.bak <enter> exit <enter>

6.The “MS-DOS Prompt” window closes. Do not reboot or restart the system! Insert the Modem into the computer and perform the standard installation procedure (see the “Windows 95” section of chapter 4, “Install- ing the Driver Software”).

7.After installing the driver software, select Start, Programs, then MS-DOS Prompt. The “MS-DOS Prompt” window reappears. At the prompt, enter the following commands, exactly as shown.

cd c:\windows\inf <enter> rename oem0.inf oem20.inf rename *.bak *.inf <enter> exit <enter>

The Modem and computer are now properly configured and ready to use.

35

Image 38
Contents PC Card Fax Modem User Guide Table of Contents Table of Contents System Requirements Package ContentsIntroduction Technical Support DOS and Windows Installing Point EnablerBefore You Begin Before You Begin Windows 95 Pcmcia Settings Windows NTCOM 2 Settings Before You Begin Installing Modem Installing the Modem Installing Driver Software Windows 95aInstalling the Driver Software Windows 95 OSR2 Installing the Driver Software Windows Installing the Driver Software Alternate Windows 98 Installation Installing the Driver Software Windows Me Windows NT DataLink V.90 Pcmcia Fax Modem Installing the Driver Software Is installed Installing the Driver Software DataLink V.90 Pcmcia Fax Modem Installing the Driver Software DataLink V.90 Pcmcia Fax Modem Installing the Driver Software Windows XP Installing the Driver Software Installing Communcations Software Installing the Communcations Software Problems and Solutions TroubleshootingUninstalling the Modem Cannot Open COM Port Error Windows 95a Windows 95 OSR2 Limited Warranty Limited Warranty DataLink V.90 Pcmcia Fax Modem Limited Warranty