Actiontec electronic PCMCIA manual Windows XP

Page 32

DataLink V.90 PCMCIA Fax Modem

Windows XP

To load the Modem’s software drivers onto a computer running Windows XP:

1.Insert the Modem into the computer’s PCMCIA slot.

2.Turn on the computer and while it boots up, insert the DataLink Installa- tion CD in the computer’s CD-ROM drive.

3.A “Found New Hardware” window appears. Select Install the software automatically (Recommended), then click Next.

29

Image 32
Contents PC Card Fax Modem User Guide Table of Contents Table of Contents System Requirements Package ContentsIntroduction Technical Support DOS and Windows Installing Point EnablerBefore You Begin Before You Begin Windows 95 Pcmcia Settings Windows NTCOM 2 Settings Before You Begin Installing Modem Installing the Modem Installing Driver Software Windows 95aInstalling the Driver Software Windows 95 OSR2 Installing the Driver Software Windows Installing the Driver Software Alternate Windows 98 Installation Installing the Driver Software Windows Me Windows NT DataLink V.90 Pcmcia Fax Modem Installing the Driver Software Is installed Installing the Driver Software DataLink V.90 Pcmcia Fax Modem Installing the Driver Software DataLink V.90 Pcmcia Fax Modem Installing the Driver Software Windows XP Installing the Driver Software Installing Communcations Software Installing the Communcations Software Problems and Solutions TroubleshootingUninstalling the Modem Cannot Open COM Port Error Windows 95a Windows 95 OSR2 Limited Warranty Limited Warranty DataLink V.90 Pcmcia Fax Modem Limited Warranty